Before we get into building the DIY Wall Planter we need to cover some exciting news! We are still waiting to learn if the network will order more episodes (we should know something very soon) but Open Concept is re-airing on the DIY Network, this Friday night, July 15 at 11pm & 11:30 EST/ 10 pm & 10:30 CST!!! We have had so many emails and comments on social asking us how to tell the network that you want more Open Concept. The very best way to have your voice heard is to tune-in LIVE!  The network needs to see your TV on and tuned-in LIVE to Open Concept to count your view ?  We are so thankful to have been given this opportunity and we would love to get to help more families! So, if you have seen it already, please, still tune-in live and make your view count ? We will be watching LIVE with you and appreciate your support!!

oc-diy-friday

oc-diy-friday

Ok, now for the hanging wall planter! We have had so many requests to get this tutorial up, so we had to move it up the list and get it to you all ASAP!

DIY-Wall-Planter-HGTV

DIY-Wall-Planter-HGTV

We built this wall planter for the Berry’s dining room for episode 3 of Open Concept on HGTV. We were lucky enough to have left over scraps of the barn wood that we used for the vent hood, planked wall and barn doors on the study console. We found the barn wood from Reclaimed Designworks and it is AMAZING!  This company has several locations throughout the country and they sell online. The tear down barns, from all across the US to salvage the barn wood! Then, they remove the nails, clean up and kiln dry the barn wood so that it’s safe and ready for your project – how amazing is that!?! We went to the Dallas location, picked out the color we liked and they loaded a packaged box of planks in our car and we were off to our shops, ready to work! You can click HERE to see the color we picked!

Now for the build! This wall planter is a very simple project! I built it with only a nailer and a saw and it’s totally customizable! You can use any type of boards on it and make it any size you choose! Here’s how I built it!

plywood-piece

plywood-piece

To start, pick up a 24″x48″ sheet of 3/4″ plywood from the hardware store.

layout-planters

layout-planters

I found these wall planters at Crate and Barrel. You can find them HERE. I bought 12.

apply-wood-glue-to-back-of-barn-wood

apply-wood-glue-to-back-of-barn-wood

I started on the bottom of the plywood with one piece of scrap wood and applied wood glue to the back of the board.

brad-nails

brad-nails

Then, I turned the board over, flush with the bottom corner of the plywood and used 5/8″ brad nails in my Ryobi 18 gauge Airstrike Nailer to attach the boards to the plywood.

brad-nails

brad-nails

You don’t need to use a ton of nails. A few will do the job. The glue is what will eventually hold the boards in place. The nails are just to keep it from moving while the glue dries. If you don’t own a nailer, a hammer and finish nails will work too.

attach-another-board

attach-another-board

Now, you can move on to the next board. Just cut it to fit on the plywood and attach it with wood glue and brad nails.

reclaimed-wood-planter-without-planter-rings

reclaimed-wood-planter-without-planter-rings

Work your way up the board. There really is no wrong way to do this. Just make sure that the joints don’t match up from row to row. My boards were all different widths, so I made a pattern based on the widths.

planter-rings-attached

planter-rings-attached

Now, space your wall planters across the board. I marked center first, then marked center from one side to the center and the same on the other.

attach-planter-ring

attach-planter-ring

Next, just attach each wall planter to the board.

wall-planter-ready-to-hang

wall-planter-ready-to-hang

That’s it! Ready for the wall!

hanging-planter-on-wall

hanging-planter-on-wall

Step one to hanging – have Whitney hold it for you ? We used a stud finder to locate the studs behind the wall. Then, we just used 3.5″ wood screws and drove the screws from the front of the piece into the wall. The boards are reclaimed and once the pots were in the planters, the screws weren’t noticeable at all.

level-the-planter

level-the-planter

Hang on Whit, I’m almost done ? Put one screw in first, then whip out the level and make sure the piece is level before you put another screw in. We did two screws per stud, two screws at the top of the piece and two at the bottom.

diy-barn-wood-wall-planter

diy-barn-wood-wall-planter

Now for the plants ?

Wall-Planter-with-Reclaimed-Wood

Wall-Planter-with-Reclaimed-Wood

Add potted succulents and you have yourself a huge piece of functional art that is sure to be a show stopper ?

DIY-Wall-Planter-HGTV

DIY-Wall-Planter-HGTV

This is the second plan that we have shared from the Episode 3 of Open Concept! You can find the plans for the Modern Farmhouse Table by clicking the pic below and you can find many other Open Concept plans HERE!

Modern-Farmhouse-Table-Open-Concept

Thanks so much for stopping by and don’t forget to join us LIVE for the re-air of Open Concept this Friday night, July 15 at 11 & 11:30 EST/ 10 & 10:30 CST on the DIY Network ?

Shanty 2 Chic


Read more