Happy Wednesday friends! We have been so excited to share this last set of plans with you! Ash and I designed a DIY Storage Coffee Table we shared on Instagram a while back, and today we are sharing the new YouTube Video Tutorial & the free plans with you! Yeah for that!
Check out the how-to video by clicking HERE or the link below!
Look how cute it turned out!
It’s pretty darn cute outside too! ?
Storage + Function= Happy Mamas ? Ok, you can download and print the FREE PLANS by clicking HERE! And, we will walk you through the whole build below!
We made our cuts using a miter saw. The box is built with 1×12. If your saw won’t make a complete 12″ cut, just flip your board over and make the second cut after doing the first.
Here are the cuts you will make for the 1×12.
We use our Kreg Jig to make pocket holes on our three 33″ boards. You can check out our favorite Kreg Jig model HERE on Amazon!
We made 3/4″ pocket holes and we will connect these boards to our longer boards using 1.25″ pocket hole screws.
You will line you box up like this.
Once you have your box built, you will make your cuts for the top and bottom. These use 1×6 and 1×6 boards. Here are the cuts you will make.
Attach the base pieces using wood glue and nails. Start by attaching the center board first, and then attach the side pieces the same way.
Flip over the table and attach the center piece the same way as you did your base piece. We then formed two lids by attaching two boards together using 3/4″ pocket holes and 1.25″ pocket hole screws.
Before attaching the lids we stained the entire piece. We used Varathane stain in Ash.
While that was drying, we gave our casters a coat of black spray paint.
These are the casters we used for this table.
We attached the hardware using hex bolts and a driver.
These are the hinges we used for our table.
Our final step before moving it in was taking a picture for Instagram! ?
Here it is all finished up!
Make sure to check out our YouTube Video Tutorial HERE and click SUBSCRIBE! We have so much more fun stuff coming out and we don’t want you to miss any of it!
Let us know if you have any questions!